Rice Lake TP Series, Rice Lake Weighing Systems - Balance Manual - Manual (Page 9)

Introduction 5
1.5 Operating Keys
Non-NTEP
Operating Key
NTEP
Operating Key
Operating Key
Definition Function
On/Off Key Key to turn on/off the unit power
Memory Key [Brief press] Initiates print or output
[Brief press] Saves the settings of the number of pieces
or percentages (%) or the limit value when
using the limit function.
Target Key [Brief press] Starts setting the number of pieces or
percentages (%).
[Continuous press] Starts setting the limit value when using the
limit function.
Function Key [Brief press] Toggle switches the units to be displayed
in succession (g, Pcs, %, etc).
[Brief press] Moves the flashing digit in the setup of a
limit value when using the value input
method.
[Brief press] Selects an item when setting the function.
[Continuous press] Invokes various functions.
[Longer Continous press] Invokes span adjustment.
Zero/Tare Key [Brief press] Resets the indication to zero when using
zero-point setup or tare subtraction.
[Brief press] Selects a value with the value input method
when using the limit function.
[Brief press] Selects a function when operating the
balance in the function mode.
ON/OFF ON/OFF
Memory Memory
Target Set
Function
Function
Zero/Tare Zero