Rice Lake TP Series, Rice Lake Weighing Systems - Balance Manual - Manual (Page 17)

Functions Setup 13
*Default factory settings
1*-5*: Default settings [
 ] ~ [  ]
*Not available on NTEP models
*: default factory settings [.] ~ [  ]
** [  ] cannot be set at [  ]
*** Not available on NTEP models
Stability parameters 
 Wide (mild)
Narrow (strict)

*


Interface  .
 Disable input/output.

* Six-digit numeric format.

Seven-digit numeric format.
Setup of measurement units
to be displayed
Register selected measuring
units with .


.



*
 [g]

*

[

] (ct)

[

] (oz)

[

] (lb)

[

] (ozt)

[

] (dwt)*

[ Lower right] (grain)
Item Set Value Description
Setup of measurement units to
be displayed
**
Register measurement units by
selecting
     
.
     
 
(t1_Hong Kong)*
  ►Upper right 
(t1_Singapore, Malaysia)***
 
►Lower right

(t1_Taiwan)*
 [mom]
 
(to)***
*3  [Pcs]
*4  [%]
*5  Until not set
Item Set Value Description