2 interface section, 2 switching functions, 1 setup of units of measurement – Rice Lake TP Series, Rice Lake Weighing Systems - Balance Manual User Manual

Page 18: Press and hold down

Advertising
background image

14 TP Series Balance

3.1.2

Interface Section

Displayed when



is set to



or



* Denotes a factory setting
** The data interval in continuous output mode is 0.1 to 1 second (the interval varies depending on weighing conditions and

other factors).

3.2 Switching Functions

Pressing

allows the user to switch the unit of measurement to [g], [ct], [%], and so on. During setup, a maximum of

five different units can be registered for use in function setup mode.

To switch the units of measurement to be displayed, press

. Each press advances through the units of measurement

to be displayed.

3.2.1

Setup of Units of Measurement

When values [



.] to [



] are entered prior to use, the desired unit of measurement to be displayed can be chosen

simply by pressing

. For more information on the units of measurement that can be set here, please refer to

“Description of Functions” on page 12.

Example:
To change the default factory settings to pound units, use [



] in the factory settings.

1. Press and hold down

.

2. Release the key as

[



] appears on the display. The function setup mode is now activated and the first item is

displayed.

Item

Set Value

Description

Output

Control



Stop output.

Output continuous at all times.

Output continuous if stable (stops output if unstable).

Outputs once by pressing

(irrespective of whether stable).

Outputs once, if stable. Outputs if the balance is stable when a sample is loaded
after the preceding sample has been removed and the balance indicated zero, or
less.

Outputs once if stable, and stops output when unstable.

Outputs once if stable, and outputs continuously when unstable. Even if the
sample is not replaced, output of the balance stops when it stabilizes after being
output once.

*

Pressing

causes the balance to output once when stable.

Baud Rate



*

1200 bps

2400 bps

4800 bps

9600 bps

Parity



*



None

Displayed only when [7. I.F. 2.]
(7-digit numeric format) is specified.

Odd

Even

Advertising
This manual is related to the following products: