Rice Lake Lift Truck/Pallet Jack Scales - CLS-Series - Manual (Page 11)

Load Cell Replacement 7
.
Figure 2-7. Remove Flexure Rod with Nuts and Washers
15. Check the flexure rod threads for smooth operation by running a nut the full distance of the rod making
sure it does not get stuck anywhere along the way. If so, clean off any paint using a wire brush and oil.
16. Oil the spherical washers using a standard machine shop oil.
17. Loosen cable clips and remove the load cell.
Figure 2-8. Load Cell Cable Clips
E n s u r e f l e x u r e r o d
t h r e a d s a r e f r e e o f
d e b r i s a n d p a i n t b y
running a nut the full
distance of the rod.
Detach load cell
clip away from
b a c k p l a t e o f
scale.