Rice Lake Lift Truck/Pallet Jack Scales - CLS-Series User Manual
Page 17
Advertising
Junction Box Replacement
13
5. Remove the indicator cable from the junction box (not applicable for wireless models).
Figure 3-3. Junction Box Location Inside the Scale (wireless version shown above)
6. Loosen the load cell clips that hold the load cell cable to the scale back frame and their general location
noted in Figure 2-8 on page 7.
7. Slip the junction box downward out of its current location between the front and back plates of the CLS.
8. Using a phillips head screwdriver, open the junction box cover to expose the inside and set the cover
aside.
Remove indicator cable
f ro m j u n c t i o n b o x ( i f
using the wired model)
Remove load cell cable
from junction box
Advertising
This manual is related to the following products: