Rice Lake Lift Truck/Pallet Jack Scales - CLS-Series - Manual (Page 38)

34 CLS Series Service Manual
5.2.13 Replacement Parts and Assembly Drawings
Table 5-10 lists replacement parts for the 920i universal enclosure model, including all parts referenced in
Figures 2-14 through 2-16.
Ref Number PN Description (Quantity) See Figure
1 66502 Overlay (1) 2-14
2 14956 Cap screw, 1/4-NCx1/2 (2)
3 15148 Lock washer, 1/4 regular (2)
4 68598 Protective lense (1)
5 67614 LCD display (1)
6 67886 Standoffs, short (4)
7 68661 Standoffs, long (2)
8 67612 CPU board (1)
9 14618 Kep nuts, 4-40NC (10)
10 94392 Power supply, bracket (1)
11 97468 Mounting plate assembly (1)
12 94392 Backplate (1)
13 14624 Lock nuts, 6-32NC, nylon (2)
14 14822 Machine screws, 4-40NC x 1/4 (13)
15 67530 Interface board connector plate (1)
16 67535 Interface board gasket (1)
17 14862 Machine screws, 8-32NC x 3/8 (4)*
18 75062 Sealing washers (12)*
19 32365 Setup switch access screw, 1/4 x 20NC x 1/4 (1)
20 42640 Machine screw 1/4-28NF x 1/4 (1)
21 15626 Cable grips, PG9 (3)
22 15627 Lock nuts, PCN9 (3)
23 30375 Nylon seal rings for PG9 cord grips (3)
24 97081 920i Enclosure (1)
25 15134 Lock washers, No. 8, Type A (3) 2-15
26 14626 Kep nuts, 8-32NC (3)*
27 45043 Ground wire, 4 in w/ No. 8 eye connector (1)
28 97464 Cover plate (1) 2-14
29 97476 Cable assembly DC power input DC/DC +/-6V supply(1) 2-14
30 15631 Cable tie, 3-in nylon (1)* 2-16
31 97474 Power cord assembly, 115 VAC and 230 VAC North American units (1) 2-14
69998 Power cord assembly, 230 VAC European units (1) —
32 67796 Power supply cable assembly, to CPU board (1) 2-15
33 68662 Ribbon cable to interface board, universal (1) 2-15
Table 5-10. Replacement Parts