Rice Lake MSI-9750A CellScale RF Portable Indicator - Manual (Page 38)

Page 38 MSI-9750A RF Remote Indicator • User Guide
9750A
HANDHELD RF REMOTE INDICATOR for
C
ELL
S
CALE
®
KEYBOARD LOCK
Keyboard lock is provided to prevent casual or accidental pressing of the keys from changing any modes. This
function works only from weight display modes.
1) Press POWER followed immediately by ESC ( SETUP ). The startup screen will appear.
2) Press the CLR ( ZERO ) key. A password text entry screen will appear.
3) Using the keypad, input the number 7415369. Press ENTER .
4) The “ARE YOU SURE” display appears. Press ENTER .
Everything is reverted to defaults. Now you must setup the 9750A again.
®
RESET ALL: The following procedure will cause you to lose all setups and will return
the 9750A to it’s default settings. Use this procedure only as the last resort of having
lost your password.
To Lock the Keyboard
DISPLAY SETUP
The 9750A offers the user a great deal of fl exibility in how weight and other information is displayed. There are
fi ve single channel preset displays and fi ve multiple channel preset displays. These presets cover the majority of
user applications. However, the 9750A also allows complete customizing of how scale data is presented on the
display.
There are two basic weight display modes, Single Channel, and Multiple Channel. The single channel display is
the primary weight display, and is used as the display mode when a channel is highlighted and switched out of
the multiple channel display. If your CellScale is equipped with multiple channels, the display can be set up to
show up to eight channels at once.
Preview Screens
When setting up Weight Displays, the 9750A shows a preview of how the screen will be formatted. Abbrevia-
tions for preview screens indicate what kind of data will be presented in each screen location. Dashes are used to
indicate the maximum screen space the data will occupy.
Preview Screen Nomenclature
Weight ................ Weight Weight Current Weight in Net or Gross with Units, Motion, and Center of Zero (COZ) indicators.
Gross-Wt ........... Gross Weight only
Tare-Wt .............. Tare-Wt Tare-Wt Tare Weight only
CHN .................. Channel number in the form X-X. e.g. 1-1. The Channel number is determined by the CellScale
Scan List.
ADR ................. Network Address in the form of XXA. e.g. 17A
Ch-Name ............ Channel Name. The Channel Name is programmed in the CellScale.
DateTime ............ Shows the Date and Time. When in the form “DateTimeEnter-Number” it may be overwritten
when entering a number with the keypad.
Enter-Number ..... Enter-Number Enter-Number Field accepts keypad entry for assignment to various functions.
1-ID-String ......... Show ID string 1.
2-ID-String ......... Show ID string 2.
Total-Wt-ID ........ Shows the Total weight stored in the current ID Code.
#-SamplesI ......... Shows the number of samples totaled and used for statistics for the current ID Code.
IDC ..................... The ID Code number in the form xxI. e.g. 2I is ID Code 2.
IDName-- ........... The ID Code name. The name must be programmed by either the CellScale or the 9750A.
Press [1] [2] [3] ALPHA . The screen will read “KEYBOARD LOCKED” briefl y.
While in Keylock mode, pressing any key will show the screen “KEYLOCK PUSH 123””
To Unlock the Keyboard
Press [1] [2] [3] . The screen will read “KEYBOARD UNLOCKED” briefl y.
Now all keys should function normally.