Rice Lake MSI-9750A CellScale RF Portable Indicator - Manual (Page 77)

MSI CellScale ® System • 9750A User Guide Page 77
MEASUREMENT SYSTEMS INTERNATIONAL
Firmware Version 5-XX for 2450 Modems
_+)#!!!_+)#!!!_+)#!!!_+)#!!!_+)#!!!_+)#!!!_+)#!!!_+)#!!!_
#!!!_+)#!!!_+)#!!!_+)#!!!_+)#!!!_+)#!!!_+)#!!!_+)#!!!_+)#
before matching baud rates
When you can read this, press any key. after matching baud
rates
When you can read this, press any key.
When you can read this, press any key.
MSI Boot Loader Version 3.K3
(1) Update Application
(2) Change Baud Rate
(ESC) Start Application
Enter Command :
10) Choosing “Update Application” will request that the fi le be uploaded.
Send (Upload) the fi le :
11) Use the terminal upload utility (part of your terminal program) to send the fi le. Monitor progress on the
terminal screen. The number to the left of the screen is the upload sector value.
xxxx Send (Upload) the fi le
During Bootloading, the 9750A will display this screen
When the upload is complete the following will appear in the PC Terminal window.
CBFF Send (Upload) the fi le :
Upload complete
Erasing sector 1 of 7
Erasing sector 2 of 7
Erasing sector 3 of 7
Erasing sector 4 of 7
Erasing sector 5 of 7
Erasing sector 6 of 7
Erasing sector 7 of 7
Erase Complete
Programming sector 1 of 7................
Programming sector 2 of 7................
Programming sector 3 of 7................
Programming sector 4 of 7................
Programming sector 5 of 7................
Programming sector 6 of 7................
Programming sector 7 of 7................
Programming Complete
Do not press any keys on the 9750A during the erasing and programming phase. When fi nished the terminal
will return to the main bootloader screen, allowing you an opportunity to repeat the upload if necessary.