Rice Lake SURVIVOR PL Rail Scale - Manual (Page 10)

Check Rod
6
Survivor ® PL
Installation Manual
Figure 2-8. Check Rod Level with Horizontal Plane
13. Weld spacer plates (P/N 71860) to weighbridge to secure it in place.
14. Repeat steps 1-13 for the second weighbridge module.
2.3 Approach and Dead Space Hardware Installation
The below instructions describe the installation of approach and dead space hardware.
Note
Reference drawings provided for approach and dead space for important details.
1. Install approach plates on anchor bolts.
Figure 2-9. Approach Plate on Anchor Bolts
2. Install approach plates at the required elevation using shims or jam nuts beneath each plate.
3. Install dead space rail plates on anchor bolts.
4. Install dead space rail plates at the required elevation.
5. The rail can now be installed.
6. Once the rail is installed, the elevation plates are ready to grout.