Rice Lake Star NP-2511 Thermal Kiosk Printer User Manual
Page 45
D-F0446 NP-2511/3511
series Specifications Ver.0.07
39
26)
【Raster Bit Image】《ESC b n1 n2 n3 Dn》
Code:〔1B〕h+〔62〕h+n1+n2+n3+Dn
※〔
01≤n1≤48〕h:3-inch model
※〔
00≤n2≤FF〕h
※〔
00≤n3≤FF〕h
Print data in raster bit image.
* Dn is raster bit image data.
* The printer prints raster bit image of width n1 byte by height n2+(256*n3) dot lines.
* The total byte of the requested raster bit image data (Dn) is n1*(n2+(256*n3)).
* Raster bit image data (Dn) exceeding the printing field will be disregarded.
* Raster bit image data (Dn) interprets bit”1” as print and bit”0” as not print.
* Relation between raster bit image data (Dn) and printed dots are as follows.
n1 byte
D1 D2 Dn1
Dn1+1 Dn1+2 Dn1*2
Dn1*2+1 Dn1*2+2 Dn1*3
n2+(256*n3)dots
n1*(n2+(256*n3))
MSB LSB
* Please add < ESC J 00h > ([1B] h + [4A] h + [00] h) at the end of this command.
* Data of this command is started printing after storage regardless of <start print/end of
set>.