Rice Lake Star NP-2511 Thermal Kiosk Printer - Manual (Page 50)

D-F0446 NP-2511/3511 series Specifications Ver.0.07 44
42) 【NV Bit Image Print】《GS P n》
Code：〔1D〕h＋〔50〕h＋n ※〔 00≤n≤02〕h，〔10≤n≤12〕h
Print the print data registered bit image.
* Selects one of the print pattern among three registered patterns by assigning 0 to 2
value to “n”.
* with making n to 1, ([10]h ~ [12] h), if vertical direction size of fixed bit image to be
printed is larger than that of distance between print head ~ cutter, full cut is inserted
automatically when the distance between print head ~ cutter is pinted, the remainder
is continuously printed after full cut. By using this function, it will be possible to print
larger top logo than that of distance between print head ~ cutter and no margin at the
top of page.
* n has the following meaning.
n(hex) Print pattern Cut insertion
00 Pattern 0
01 Pattern 1
02 Pattern 2
nill
10～12 00～02 available
43) 【NV Bit Image registration】《GS T n》
Code：〔1D〕h＋〔54〕h＋n
Register the predetermined bit image print data.
* It is possible to register from 0 to 2 different kinds of patterns (3 patterns).
* In each pattern, up to the maximum of 11cm length of bit image print data can be
registered. The bit image print data exceeding the maximum length is neglected.
* The registered data is not erased even if the power is set on/off or [the printer is
initialized], [software reset]
* n has the following meaning.
n(hex) Function
0 Start of pattern 0 registration
1 Start of pattern 1 registration
2 Start of pattern 2 registration
FF End of registration
* When registrations started in the middle of a line, whole line is registered.
* When registration ended in the middle of a line, whole line is not registered.
* Following is a command sequence of pattern 0 registration.
GS T 00 h + (bit image data assigned by ESC *) x n lines + GS T FF h
44) 【Firmfare downloading】《GS d Dn》
Code：〔1D〕h＋〔64〕h＋Dn
* Download printer firmware in hexadecimal code and rewrite firmware
according to the outcome, and reboot.
* Dn is firmware’s hex code which complies with INTELLEX Hex format.
45) 【Select font of HRI character】《GS f n》
Code：〔1D〕h＋〔66〕h＋n ※〔 00≤n≤01〕h
* Selects Font of HRI character when print barcode.
* n has the following meaning.
n(hex) Font style
00 Font A
01 Font B
* The default of n is〔00〕h.