Figure 2-7. optional access ramp – Rice Lake Summit 3000 Low-Profile Package User Manual
Page 11
Advertising
Installation
7
Access ramps can only be attached to the scale on one of the two scale sides that are perpendicular to the
longitudinal axis of the load cells. For example, the scale shown in Figure 2-7 could have an access ramp on the
left side as shown, and/or on the right side. The top and bottom sides, however, will not accept the ramp
mounting plates.
Figure 2-7. Optional Access Ramp
Longitudinal axis
of load cells
Advertising
This manual is related to the following products: