Rice Lake Summit™ 3000 Low-Profile Package - Manual (Page 6)

2 Summit 3000 Installation Manual
General Safety
Do not operate or work on this equipment unless you have read and understand instructions in the
manual. Failure to follow the instructions or heed the warnings could result in injury or death. Contact
any Rice Lake Weighing Systems dealer for replacement manuals. Proper care is your responsibility.
Failure to heed may result in serious injury or death.
DO NOT allow minors (children) or inexperienced persons to operate this unit.
DO NOT operate without all shields and guards in place.
DO NOT jump on the scale.
DO NOT use for purposes other then weight taking.
DO NOT place fingers into slots or possible pinch points.
DO NOT use any load bearing component that is worn beyond 5% of the original dimension.
DO NOT use this product if any of the components are cracked.
DO NOT exceed the rated load limit of the unit.
DO NOT make alterations or modifications to the unit.
DO NOT remove or obscure warning labels.
Keep hands, feet and loose clothing away from moving parts.
1.2 Operating Requirements
Electrical Grounding
For systems where the scale is connected to a 115 VAC circuit, the indicator must be directly connected to an
earth ground with a ground interface cable of no more than 3W resistance throughout its length.
Load Cell Excitation
Rated Excitation: 10 VDC
Maximum Excitation: 15 VDC
Grade Level Requirements
The supporting surface for the four feet of the scale must be level within 1/4 inch of horizontal.
Safe Static Overloading Capacity
Maximum: 150% of scale capacity
Nominal Scale Height
3.625 inch (92 mm)
Approvals
NTEP CoC Number 92-001
WARNING
• N A T IO N A L C O NF E R E N C E • O
N
W
E I G H T S A N D M E A S U R E S