Ring Communications CB901EX - Manual (Page 59)

April 2012 Operations Manual CB901EX
LINE EQUIPMENT
The Line Equipment Number is the location of the intercom station in the central exchange. The
number is hexadecimal in the range $00-$3D (62 subscribers). All individual station programming is
done to this line equipment number. The programmed information may be listed by Line Equipment
Number or by Call Number.
COMMANDS
LLE List Line Equipment (sorted by Line Equipment Number)
LCN List Call Number (sorted by Call Number)
Example:
>LLE
cr
Line Equipment Number <$00-$3D/*> : 00-06
cr
Line Call In Priority Network Address Remote
Equ. Number Caller ID Type QUE Alarm Call Display Printer Video NET LEQ
==== ========= ========== ==== ==== ===== ==== ======= ======= ===== === ===
$00 10 Lobby ICM RING 1 3 0A 0B ... ... ...
$01 11 Car 1A ICM .... 1 5 ... 0B ... ... ...
$02 12 Car 1B ICM .... 1 5 ... 0B ... ... ...
$03 13 Car 2A ICM .... 1 5 ... 0B ... ... ...
$04 14 Car 2B ICM .... 1 5 ... 0B ... ... ...
$05 15 MotorRoom ICM RING 1 3 ... 0B ... ... ...
$06 16 Phone Line PTT RING 1 3 ... 0B ... ... ...
>
CALL NUMBER
Call numbers are assigned to all Line Equipment Numbers when the system is defaulted (network
address set to $00). The first Line Equipment will be call number 10, 100 or 1000 depending on the
number of call digits in the system . All remaining line equipment numbers are assigned consecutive
call numbers. These call numbers may be reassigned.
PROGRAMMING
The following commands are used for this feature:
SCNU
Set Call Number Undefined
SCN Set Call Number
Example: Change the call numbers from default 100-155 to 200-255. This is useful when two or more
exchanges are connected via Tie-line. Use the R(range) option to assign call numbers to a range of line
equipment numbers.
Page 59 of 77
Ring-Master