Ring Communications CB901EX - Manual (Page 68)

CB901EX Operations Manual March 2011
ANNUNCIATOR DISPLAY
Any intercom station in the system may use an annunciator display (DAD104) to display and
answer calls in the personal queue. Each DAD104 is assigned to only one intercom station.
PROGRAMMING
The following commands are used for this feature.
SNA
Set Network Address
LCN List Call Number
Example: Subscriber 10 is assigned to the DAD104 with network address 0A (hex). The network
address is set with DIP-switch in the DAD104.
>SNA
cr
Call Number <10-99/*> : 10
cr
Node Type (1=Annunciator 2=Printer 3=Video 4=RemoteNet 5=RemoteLEQ) <1..5> : 1
cr
Network Address <$00..$FF> : 0A
cr
EVENT LOG PRINTER
The event log printer is connected to the system using one dedicated DNA100. The printer will
print events for all intercom stations that have been assigned to this printer.
PROGRAMMING
The following commands are used for this feature.
SNA
Set Network Address
LCN List Call Number
Example: Subscribers 10-17 are assigned to log events to the printer with network address 0B (hex).
The network address is set with DIP-switch in the DNA100.
>SNA
cr
Call Number <10-99/*> : 10-17
cr
Node Type (1=Annunciator 2=Printer 3=Video) <1..3> : 2
cr
Network Address <$00..$FF> : 0B
cr
Page 68 of 77
Ring-Master