Crestron electronic C2N-DAP8RC - Manual (Page 29)

Crestron C2N-DAP8RC Digital Audio Processor with Room Control
Operations Guide – DOC. 8187A Digital Audio Processor with Room Control: C2N-DAP8RC • 25
“Transmitter Identification” Window Showing Transmitter ID
Map the Universal Remote
Every button press on a transmitter is assigned a decimal Button ID. These button
presses must be mapped to commands that will be programmed in SIMPL Windows.
This is accomplished simply by pressing each button and taking note of its Button
ID, via the “Transmitter Identification” window.
1. Click Clear in the “Transmitter Identification” window.
2. Press a button on the transmitter and manually record its Button Action
name and Button ID.
3. Repeat for every button on the transmitter.