Crestron electronic C2N-DAP8RC - Manual (Page 45)

Crestron C2N-DAP8RC Digital Audio Processor with Room Control
Operations Guide – DOC. 8187A Digital Audio Processor with Room Control: C2N-DAP8RC • 41
Example Program
The Example Program for the C2N-DAP8RC demonstrates the various features of
the unit. The program also serves as a basic model for those individuals who wish to
do system setup and room balancing functions via a touchpanel. The program does
virtually all of the functions that can be accomplished via the DAT software, and lets
you immediately hear the results of your adjustments.
The example program for the C2N-DAP8RC is available from the Crestron FTP site
(ftp://ftp.crestron.com/Examples). Search for C2N-DAP8RC.Basic Example.zip.
The program is supplied designed to work with a Crestron TPS-4500 touchpanel and
a 2-Series processor. If your system uses a different touchpanel, convert the program
for that touchpanel.
Preparation
In preparation for running the Example Program, do the following:
1. Verify that all the necessary procedures detailed in “Setup” on page 11 have
been completed.
2. Verify that communication setup procedures described in “Communication
Settings” on page 55 have been completed.
3. After downloading the Example Program from the Crestron website, use the
instructions given in “Upload via Crestron Viewport” on page 57, to load
the .spz program to the control system and load the .vtz program to the
touchpanel.
Running the Example Program
Once the programs are loaded to the touchpanel and the control system, the main
screen appears on the touchpanel.
Example Program Main Screen