Crestron electronic C2N-DAP8RC - Manual (Page 42)

Digital Audio Processor with Room Control Crestron C2N-DAP8RC
38 • Digital Audio Processor with Room Control: C2N-DAP8RC Operations Guide - DOC. 8187A
Dimension
This control allows the user to gradually adjust the soundfield either towards the
front or the rear. This can be useful to help achieve the desired balance from all the
speakers with certain recordings that may contain either too much or too little spatial
effect. Step “0” is the recommended setting, which has no effect on the sound. Steps
1 through 7 gradually move the sound forward, and steps –1 through –7 move the
sound toward the surround speakers.
NOTE: The Panorama, Center Field and Dimension settings are only used in
Prologic II music mode.
Graphic EQ
This tab lets you specify how many (0, 3, or 5) of the six available filters for each
speaker will function like a standard graphic equalizer (with fixed frequencies and
settable gain/attenuation only), and how many (the remainder) will function as
parametric equalizers with settable frequency, gain, bandwidth, and filter type.
If you select 0 bands, all six filters will function as parametric equalizers. If you
select 3 or 5 bands, the following warning appears:
When you click YES, the display includes the appropriate one of the two screens
shown on the next page.