Crestron electronic C2N-DAP8RC - Manual (Page 6)

Digital Audio Processor with Room Control Crestron C2N-DAP8RC
2 • Digital Audio Processor with Room Control: C2N-DAP8RC Operations Guide - DOC. 8187A
Functional Summary – Video I/O & Miscellaneous
The CNAMPX-7x200 7-channel, 200 watts per channel surround sound amplifier is
the ideal companion product to the C2N-DAP8RC surround sound processor.
The C2N-DAP8RC provides digital surround sound processing along with CAT5
head end/local AV distribution and room control functions. The result is cost-
effective surround sound in any room of the house.
Surround Sound Modes
The C2N-DAP8RC provides the following surround sound modes, permitting choice
of the format that best suits the entertainment medium selected, the specific
characteristics of the listening/viewing area, and the personal preferences of the
listener.
Dolby Digital 5.1
Typically, 5.1-channel audio consists of five discrete, full-range main channels (left,
center, right, left surround, and right surround) plus an optional band-limited low
frequency effects (LFE) channel for added bass (subwoofer). Dolby Digital
bitstreams deliver full frequency bandwidth main channels, from 3 Hz to 20 kHz,
and a limited frequency bandwidth LFE channel, from 3 Hz to 120 Hz.
Dolby Pro Logic
As a descendent of the advanced technology used in Dolby Stereo theaters, Dolby
Pro Logic Surround decoders give enhanced spatial and directional effects when
used in the home environment. Sophisticated logic steering techniques are used to
extend the impact of the soundtrack over a wider listening area. Wide separation,
smooth dynamic action, and proper spatial imaging are key characteristics of Pro
Logic decoders.
Dolby Pro Logic II
Dolby Pro Logic II creates five full-bandwidth output channels from two-channel
sources. This is done using an advanced, high-purity matrix surround decoder that
extracts the spatial properties of the original recording without adding any new
sounds or tonal colorations.
• One RJ-45 - four channels of balanced video input; three
channels with input level compensation adjustments
• One RJ-45 - four channels of balanced video output
• Twelve RCA local (analog) video inputs - any combination of
composite, S, or component (including HDTV); each input
includes built-in video sensor.
• Twelve RCA local (analog) video outputs
• RJ-11 for RS-232 control of serial devices, or for
uploading/upgrading firmware for the C2N-DAP8RC
• Mini-Cresnet for connection to Cresnet devices and main
processor
• Four infrared (IR) output ports for control of third-party IR
devices (using STIRP), or for one-way RS-232.
• One IR input jack for CNXRMIRD sensor
• Front panel PWR and NET LEDs
• Touch-settable ID capable