Crestron electronic C2N-DAP8RC - Manual (Page 67)

Crestron C2N-DAP8RC Digital Audio Processor with Room Control
Operations Guide – DOC. 8187A Digital Audio Processor with Room Control: C2N-DAP8RC • 63
Appendix: Advanced Programming Symbols
The symbols for the surround sound processor’s Surround Sound Decoder symbol,
Slot 08; the Speaker Settings symbol, Slot 09 Sub-Slot 1; the Full Parametric EQ
Controls symbol, Slot 09 Sub-Slot 2; and the Graphic EQ Controls symbol, Slot 09
Sub-Slot 3, are very complex. Crestron strongly recommends using its Digital Audio
Tools (DAT) software to configure these modules. However, they are described in
this Appendix for those advanced programmers who wish to program them in
SIMPL Windows.
Slot 08: Surround Sound Decoder
The Surround Sound Decoder is a digital signal processor (DSP) built into slot 08 of
the C2N-DAP8RC surround sound processor. The DSP can be programmed via
SIMPL Windows and/or Crestron's Digital Audio Tools software. The Surround
Sound Decoder symbol is complex, and is illustrated in two parts: the digital inputs
and outputs, and the analog inputs and outputs, as shown on the next two pages. The
tables following the illustrations describe the input and output signals. For additional
details, press F1 to access the SIMPL Windows help file.