Calibration, Initializing automatic calibration, Torb – Torbal AGZN200 User Manual
Page 12: Baud, Chapter 8
Advertising
Instruction Manual - TORBAL AGZN Series
Chapter 8.
CALIBRATION
When the scale is initially installed it must be calibrated to ensure accuracy of weighing results.
Calibration should be performed periodically or whenever the scale is moved. Before calibrating the scale,
have the appropriate calibration weights available.
1
2
1.Enter the main menu by pressing the MENU key.
2. Enter the calibration set up by pressing the T Key when “CALIBR” is displayed.
3. Press the T Key again when “CAL ON” is displayed.
4. Calibration mass value settings which can be used for calibration adjustment will be displayed sequentially.
Press the T Key when the desired external calibration mass value is displayed.
Advertising
This manual is related to the following products: