Torbal AGZN200 - Manual (Page 45)

Instruction Manual - TORBAL AGZN Series
16.1.2.Date
1. To set the date, press T when “DATE” is displayed.
2. The current date setting and the command “OUT” will scroll sequentially. To set a new date, press T when
the date is displayed. To exit, press T when command “OUT” is displayed.
3. After T is pressed, when the current date is displayed, command “YEAR” will be displayed followed by a
dashed line.
4. Use the following keys to enter the current year setting: the C key to increment a digit, the T key to accept and
go to the next digit, and MENU to accept the year setting. Use a four-digit year configuration (i.e., 2007).
5. Once the year is set, command “MONTH” will be displayed followed by a dashed line.
4 5