Torbal AGZN200 - Manual (Page 35)

Instruction Manual - TORBAL AGZN Series
2. When command “DENSITY” is displayed, press the T key.
3. Command “DEN ON” and “DEN OFF” will be displayed sequentially.
4. To proceed with the density calculation, press the T key when “DEN ON” is displayed.
5. Press the T key when command “LIQUID” is displayed.
6. Once LIQUID is selected, command “PLUNGER” will be displayed, indicating to enter the volume of the
plunger used in the density kit, which can be found on the plunger hook included with the density kit.
3 5