Torbal AGZN200 - Manual (Page 16)

Instruction Manual - TORBAL AGZN Series
4. To enable AZSM, press the T key when AUT ON is displayed.
5. To disable AZSM, press the T key when AUT OFF is displayed.
Note: AZSM is automatically enabled for 10 minutes after the scale is turned ON, regardless of its ON/OFF
configuration.
1 6
9.1.2.Configuration
The AZSM range can be configured to work between 0.1d and 5d. To change the AZSM range, follow
these steps:
1. Enter the main menu by pressing the MENU key.
2. When command “AUTOTAR” is displayed, press the T key.