Conceptronic C300BRS4 - Manual (Page 2)

Conceptronic C300BRS4 User Manual
2
About This Manual
This manual provides descriptions of the Conceptronic C300BRS4 802.11n Wireless Broadband
Router, its hardware and software features, and how to set up and use the device on your small
office or home network.
Before You Start
Please read and make sure you understand all the prerequisites for proper installation of your new
Wireless Broadband Router. Have all the necessary information and equipment on hand before
beginning the installation. A packing list is included at the end of this section.
Installation Overview
The procedure to install the Wireless Broadband Router can be described in general terms in the
following steps:
1. Gather information and equipment needed to install the device. Check the contents of the
package to be certain that everything listed on the packing list is included. A packing list is
included at the end of this section. The information you will need includes the account name
or number and the password used to gain access to your service provider’s network, and
ultimately to the Internet.
2. Install the hardware, that is, connect the Ethernet cables to the device to establish the
necessary network links to your computer and connect the power adapter to power on the
Wireless Broadband Router.
3. Check the IP settings on your computer and change them if necessary so the computer can
access the web-based software built into the Wireless Broadband Router. Without the correct
IP settings your computer will not be able to communicate with the device or access the
software used to configure the Wireless Broadband Router. Without compatible IP settings on
your computer, you will not be able to use a web browser to access the Internet.
4. Use the web-based management software to configure the device. Many users can install the
Wireless Broadband Router with the Setup Wizard. Some users may not need to change any of
the device settings that establish and maintain the network connection. Follow the
instructions of your service provider to find out what is required for your account.