Conceptronic C300BRS4 User Manual
Page 27
Conceptronic C300BRS4
User Manual
27
WPA Encryption
WiFi Protected Access was designed to provide improved data encryption, perceived as weak in
WEP, and to provide user authentication, largely nonexistent in WEP. There are two versions, WPA
and WPA2; both are supported by the Access Point. WPA includes the option of using a Pre-Shared
Key similar to WEP, or a RADIUS server can be used for verification. In addition, WPA2-Auto is
offered for user convenience.
WPA/WPA2 Encryption with Radius Server
Wireless Settings window for WPA and WPA2
1.
Select the type of WPA encryption for your Radius Server, WPA or WPA2.
2.
Select the desired Cipher Type, TKIP, AES, or TKIP/AES.
3.
Enter the RADIUS Server IP Address and the RADIUS Port for your Radius Server.
4.
Enter the Shared Key (between 1 and 63 characters) which is needed for the Radius server.
5.
Re-enter the Shared Key in the second field.
6.
Click Apply.
Note:
The values needed for RADIUS authentication can be obtained from your Internet Service
Provider (ISP).