Conceptronic C300BRS4 - Manual (Page 22)

Conceptronic C300BRS4 User Manual
22
J. You can change the SSID of the
router. The SSID is the name which
will be broadcasted through the
Wireless part.
You can change the channel between
channel 1 and 13. If you experience
slow connections or break-downs,
there can be another accesspoint in
your area which can interfere with
your wireless channel. In that case,
you can try another channel.
When completed, click “Next”.
You can secure your Wireless Connection with encryption. By default, the Wireless Connection is not
secured. To prevent unauthorized access to your network, set a security level through the Setup
Wizard.
If you want to use the WPS feature of the C300BRS4, you can skip the wireless configuration and
continue the Setup Wizard without encryption. To setup your WPS security, please proceed to the
section ‘HOME – WIRELESS’ of this chapter.
Note: All security options of the Setup Wizard are explained, but it is advised to secure your
network with “WPA-PSK/WPA2-PSK” security if your Clients do not support WPS. This is the
highest WPA2 security level, with backwards compatibility to WPA only clients.
Note: Remember or write down the entered wireless security information. You will need it when
you want to configure a Wireless Client to connect to the C300BRS4!
K. Select a security level for your
Wireless Network.
When a security level is chosen, the
Wizard will show fields for the
required information.