Conceptronic C300BRS4 - Manual (Page 31)

Conceptronic C300BRS4 User Manual
31
The C300BRS4 will activate WPA security on your wireless network and accepts the wireless
connection of your Wireless Client with the entered Pin Code.
The C300BRS4 will keep the WPS authentication active for 120 seconds. During this process, the WPS
LED will blink. If there is no connection in these 120 seconds, the LED will turn off and the WPS
authentication process is stopped.
Click “Continue” to return to the WPS Wizard screen.
Note: If the WPS feature is not used earlier, the wireless network will still be unencrypted.
If the authentication of the Wireless Client is succeeded, the Wizard will show “WPS - Adding
Wireless Device Success”. The WPS LED will burn steady blue for 5 minutes. After these 5 minutes,
the LED will turn off.
Click “Continue” to return to the Wireless Configuration page.
Your Wireless Client is now connected to the C300BRS4 and your network is secured with WPA
Encryption.
If you want to add more Wireless Clients with the WPS feature, repeat step A t/m C.