Conceptronic C300BRS4 User Manual
Page 26
Conceptronic C300BRS4
User Manual
26
WEP Encryption
WEP (Wireless Encryption Protocol) encryption can be enabled for security and privacy. WEP
encrypts the data portion of each frame transmitted from the wireless adapter using one of the
predefined keys. The router offers 64- or 128-bit encryption with four keys available.
To bring up the Wireless Settings window for WEP, select WEP from the Set Wireless Security
Mode radio-buttons.
Wireless Settings window for WEP
1.
Select an Authentication type, Open System or Shared Key.
2.
Select the desired level of WEP Encryption, 64Bit or 128Bit.
3.
Select the desired key input format, HEX (hexadecimal) or ASCII.
4.
Select a key by clicking a radio button on the left and then enter the proper-length key.
5.
Click Apply.
Note:
If encryption of any kind, at any level is applied to the Wireless network, all devices on
the network must comply with all security measures.