Wine Guardian Ducted Split Wine Cellar Cooling Systems (WGS175) - Manual - Manual (Page 56)

58
Alarm Codes
High temperature
alarm (!)
Flashing
temperature
number
Press the “Up” or “Down” arrow once to change
screen from alarm to normal Temperature and
Humidity indication. “Flashing temperature number”
Along with flashing (!) symbol will remain on screen
until temperature falls below the High Temperature
Alarm set point (Setting 3).
Low temperature
alarm
Flashing temperature
number
Press the “Up” or “Down” arrow once to change
screen from alarm to normal Temperature and
Humidity indication. “Flashing temperature number”
Along with flashing (!) symbol will remain on screen
until temperature rises above the Low Temperature
Alarm set point (Setting 2).
High humidity alarm
Flashing humidity
number
Press the “Up” or “Down” arrow once to change
screen from alarm to normal Temperature and
Humidity indication. “Flashing humidity number”
Along with flashing (!) symbol will remain on screen
until humidity falls below the High Humidity Alarm
set point (Setting 5).
Low humidity alarm
Flashing humidity
number
Press the “Up” or “Down” arrow once to change
screen from alarm to normal Temperature and
Humidity indication. “Flashing humidity number”
Along with flashing (!) symbol will remain on screen
until humidity rises above the Low Humidity Alarm
set point (Setting 4).
Press the “Up” or “Down” arrow once to change
screen from alarm to normal Temperature and
Humidity indication.
THIS ALARM FORCES THE SYSTEM TO
SHUT DOWN. “!1” will remain on screen until the
High Pressure reset switch has been reset. See the
trouble shooting guide page 47 for “Instructions to
Reset High Pressure Switch”
Open Fault
!1= High pressure
switch fault