Wine Guardian Ducted Split Wine Cellar Cooling Systems (WGS175) - Manual - Manual (Page 59)

61
CAUTION
Rick of personal injury.
Starting-up and Operating the Wine Guardian Split System
Now that the installation is complete, it’s time to start the unit up. Check to make sure all ductwork
and electrical connections are secure.
Replace all panels which were removed during installation. Check that all of the openings in the unit
are covered with a blank panel, a ductwork connection or a grille.
Cover all openings of the unit to prevent a hand or finger from access inside the unit.
Turn on the Unit
Plug in the unit. Turn-on the rocker switch on the side of the unit. The rocker switch lights up to
indicate power to the unit. The unit may not come on right away due to the timer built into the
circuiting to prevent short-cycling.
Testing the Fan
（
Factory default is AUTO FAN operation. You change into setting 7 to change from “AUTO” to
“ON.
 ON means the fan runs continuously and indicates that the power is on and the
control circuit is energized and operating.
 AUTO means the fan runs only when the thermostat is calling for cooling, heating,
or the optional humidistat is calling for humidification.
。