B&C Technologies SP Series Commercial - Manual (Page 11)

Chapter 2
Introduction
The B&C SP Series is the professional freestanding washer-extractor series of machines from B&C
Technologies. It is an open pocket washer-extractor with a large door opening for easy and quick
loading and unloading. It has been developed for the on premise market, and is suitable for
commercial laundries, hotel and other places where laundry might be processed
The design allows for top performance at lowest possible operation cost and investment. The
flexible electronic control center ensures that maximum productivity is obtained.
The SP series utilizes high quality material, such as 304 (18/8) stainless steel in vital parts in contact
with the wash solution. It has a stainless steel cabinet for long life with easily removable panels.
The key advantages of this series are the simplicity of the microprocessor and the electronic AC
drive system, which utilizes only one motor. The system allows for washing and extraction at
any speed and mechanical action to suit any textile fiber used today and tomorrow. A built in
suspension system isolate objectionable vibrations and the high speed final extraction saves time
and energy in the finishing operation.
A single compartment supply dispenser for powder and liquid detergents is standard (five com-
partment optional) and the machine is designed to accept the connection of 8 additional external
chemical lines and pumps.
The SP series is also prepared to accept the connection of water reuse systems. These systems can
be installed separate or on top of the machine. They are available in either single or dual tanks
for maximum savings of water up to 40%. The tanks can be equipped with or without steam or
electrical heat depending on installation and operation. The water reuse system is programmable
by the machines electronic control center.
Wetcleaning and Ozone integration are also possible with the SP series, making them the most
flexible machine available today.
7