B&C Technologies SP Series Commercial - Manual (Page 13)

oclock or 1-2 oclock positions. This mechanical action removes soil from the fabric. Furthermore,
the lifters are perforated on the top so that water can cascade over the goods and wet them quickly.
This reduces water consumption as water is picked up at the cylinders lowest point and lifted and
splashed over the goods at the highest point as the cylinder rotates.
A stainless steel door is provided for loading and unloading. A door lock system prevents op-
eration of the machine when the door is open. The door is locked during operation utilizing a
solenoid and a manual latch for safety reasons. The door lock is provided with a magnetic sensor
to indicate that the machine is locked and provide for start of the machine when the door is closed
and locked.
The AC drive, contactor, circuit overload protectors, input power supply connections, external
supply connections, and control transformer are behind a cover on the rear of the machine.
The supply dispenser is mounted on the front of the machine and is accessed by opening the cover
door. Supplies, both liquid and powder, may be added by pulling the dispenser cups out and
placing the appropriate supply in each. Supplies are flushed into the machine at the proper time
in the cycle, controlled by the microcomputer.
Holes are provided at the rear of the machine for connection to an external, central liquid supply
unit. Electrical connections are provided for the liquid supply unit on a terminal strip inside the
rear control module.
9