Hit Products RainPro Expandable - Manual (Page 16)

1. With dial in any position, press up arrow to increase
water budget or down arrow to decrease water
budget.
2. The actual individual station run times as affected by
the current water budget setting can be viewed by
rotating the dial to “Station Run Times.”
3. To check the current water budget level setting or to
get the 100% (original setting/base setting), rotate the
dial to the “RUN” position. Press either the up or down
arrow. The current setting will be displayed.
BONUS FEATURES
Activate or De-activate Master Valve/Pump Start by Station:
1. Rotate dial to Pump/Master Valve ON/OFF. “ON” will
be highlighted.
2. Push the - button to change from ON to OFF.
3. Push the → button to select the station.
4. Rotate dial to the “RUN” position.
NOTE: Pump Start/Master Valve circuit does not operate
during “PAUSE”.
RAIN DELAY
1. Rotate the dial to the “RAIN/OFF” position.
2. Use the + button to select a number 1 – 7 “Days
Left.”
3. Rotate the dial back to “RUN”
4. The display will read “OFF” and the number of
“DAYS LEFT”
5. The controller will not run until the numbers of
days have past. The days will change at midnight.
16