Para 2-26 – Night Optics Falcon 6x Gen 3 Gated Long-Range Night Vision Binocular User Manual
Page 114
2-79
(1)
Pull the power switch knob (Figure 2-1) out and rotate
clockwise to the IR position. With the goggles held to the eyes,
observe that a red light appears in the left eyepiece. This indicates
that the IR source is operating.
(2)
Operation with IR Spot/Flood Lens:
(a)
Pull the power switch knob (Figure 2-1) out and
rotate clockwise to the IR position. With the goggles held to the
eyes, turn the IR spot/flood lens until you have achieved the
optimum illumination for the desired distance.
(b)
Turn the power switch counterclockwise to the ON
position. Observe that the red indicator disappears.
2-26 OPERATION WITH 3X MAGNIFIER
(1)
Install 3X magnifier per paragraph 2-20.
NOTE
The mated 3X magnifier and objective lens will
turn as a unit to allow focusing.
(2)
Grasp the 3X magnifier and focus while observing an
object until the sharpest image is obtained.