Figure 2-21 – Night Optics Falcon 6x Gen 3 Gated Long-Range Night Vision Binocular User Manual
Page 92
Advertising
2-57
Figure 2-21. Attaching Helmet
Mount to Strap (New
Nape Strap).
(9)
Engage the nape strap at the nape strap latch. Tension
the nape strap for a stable fit, then install and tension the helmet
chinstrap. The brow of the helmet should be parallel to the ground
and the helmet stable on the head.
(10) To install the helmet mount into the strap, place it over
the top of the mounting clip and slide it down until it locks into
place with a click (see Figure 2-21).
Advertising
This manual is related to the following products: