Night Optics Falcon 6x Gen 3 Gated Long-Range Night Vision Binocular - Manual (Page 57)

2-22
2-3 RESOLUTION CHECK USING THE TS-4348/UV
TEST SET
NOTE
•
The TS-4348/UV test set can be used by the
operator or unit maintenance to check the
resolution of an NVG at any time.
NOTE
•
The TS-4348/UV test set can be used by
Direct Support/Intermediate Level to perform
the resolution testing 180 Day Service. If a
system fails it must be tested on the TS-
3895A/UV Test Set.
NOTE
Verify the resolution of the goggles using the
TS-4348/UV test set at every opportunity. The
resolution cannot be accurately measured without
the test set.
The following procedures are designed to check the performance
of the image intensifier.
a. Setup. Before using the TS-4348/UV test set, refer to
TM 11-5855-299-12&P to set up and familiarize yourself with its
operation and the warnings and cautions associated with that test
equipment.