Night Optics Falcon 6x Gen 3 Gated Long-Range Night Vision Binocular - Manual (Page 116)

2-81
NOTE
•
Prior to placing goggles into carrying case,
ensure goggles and case are free of dirt,
dust, and moisture.
•
The goggles and helmet mount should not be
left on the helmet when the helmet is
removed.
(e) Properly position the pull tabs (carrying case
pockets) by sliding your finger into each pocket to tuck each tab
into place. (Old case only)
•
Old helmet mount will not fit into the carrying
case, store in the shipping and storage case.
• Put the sacrificial window in the bottom left or
right corner of the carrying case accessory
pocket to prevent damage to the window.
(Old case only)
(f) Refer to Figure 1-1 for proper placement of demist
shields, batteries, carrying case strap, lens paper, sacrificial
window, manual, LIF, browpads, headmount, helmet mount and
compass.
(g) Place the goggles (objective lens down) into the
shallow pocket of the carrying case.
(h) Place the carrying case into the shipping and
storage case; close and latch. (Figure 1-1)
(i) Return to storage area.
CAUTION