Night Optics Falcon 6x Gen 3 Gated Long-Range Night Vision Binocular - Manual (Page 115)

2-80
2-27 PREPARATION FOR STORAGE
(1) Shutdown. Perform the following procedures to shut
down the goggles.
(a) Turn the power switch to the OFF position.
(b) Remove the goggles from the headmount or helmet
mount (if so equipped) by depressing the latch lever (Figure 2-1)
and removing the goggles from the headmount or helmet mount
socket (Figure 2-13).
(2) Packaging After Use.
Do not carry batteries in pockets containing metal
objects such as coins, keys, etc. Metal objects
can cause the batteries to short circuit and
become very hot.
(a) Unscrew battery cap and remove battery(ies).
(b) Inspect the battery compartment for corrosion or
moisture. Clean and dry if necessary.
(c) Replace the battery cap.
(d) Remove the demist shields, sacrificial window,
compass or 3X magnifier if installed. Install objective lens cap.
WARNING