3 override restart – Pilz PSEN op4F-A-14-180/1 User Manual
Page 56
Advertising
PSEN op4F/H-A series
OPERATING MANUAL
56
1003067-EN-02
ACM configuration: Override timeout
7.8.3 Override restart
This can only be selected when the light curtain is in manual restart mode; users can select
the type of override restart: normal or automatic.
The RESET/RESTART/ALIGN input (Pin 3 of the 12-pin M12 connector – RX-side) must be
connected to a 24 V DC N/O contact.
Fig. 53 – Override restart connection
Advertising
This manual is related to the following products: