Axesstel MV400 - Manual (Page 12)

11
OFF No EV-DO signal
Solid Green Strongest level
Solid Orange Medium level
Solid Red Low signal
3. Connect LED
This LED informs you that the Modem is connected to a wireless network and
passed through the user/password validation.
OFF Modem is not connected to network
Solid Green Modem is connected to network
4. 1x/EV-DO LED
This LED informs you that the Modem is tuned to a 1x or EV-DO wireless
network. Normally your Modem is programmed to search and use EV-DO
network. If unavailable, the Modem will try to search for a 1x network. Please
check with your Service Provider for default setting.
OFF 1x
Solid Green
EV-DO
5. Ethernet LED
This LED indicates that there are computers connecting to your Modem via one
of the RJ-45 ports. When the LED is blinking, it indicates that there are activities
(data passed through).
OFF No RJ-45 (Ethernet) connection
Solid Green At least one of the RJ-45 ports in use
Blinking Green Active data passed through the ports
6. Wi-Fi LED (MV400-series only)
This LED indicates that your Modem is setup to have Wi-Fi capability. When the
LED is blinking, it indicates that there are activities (data passed through).
OFF No Wi-Fi
Solid Green Wi-Fi network within Modem is activated
Blinking Green Active data passed through Wi-Fi