Axesstel MV400 - Manual (Page 46)

45
Block Services
The Modem can be configured to restrict access to the Internet, email, or other
network services at specific days and times. Restriction can be set for a single
computer, a range of computers, or multiple computers.
To restrict Internet access to a single computer, for example, enter the IP address
of the computer you wish to restrict access to in the IP fields. Next, enter “80” in
both the port fields. Select “Block”.
MAC Block Services
The MAC address filter is a powerful security feature that allows you to specify
which computers are allowed on the network. Any computer attempting to
access the network that is not specified in the filter list will be denied access.
When you enable this feature, you must enter the MAC address of each client
(computer) on your network to allow network access to each.
MAC Services Blocking can be set in three modes.
¾ Disable. In this mode, there is no restriction to any device connected to
the Modem whether it is through Wi-Fi or Ethernet ports.
¾ Deny. In this mode, the service table shows the client MAC address
being blocked by the Modem.
¾ Allow. In this mode, the service table shows the client MAC address