Axesstel MV400 - Manual (Page 49)

48
unique, advanced feature of your Modem. It is possible to change the
subnet mask if necessary; however, do NOT make changes to the subnet
mask unless you have a specific reason to do so. The default setting is
“255.255.255.0”.
Use Router as DHCP Server
The DHCP server function makes setting up a network very easy by
assigning IP addresses to each computer on the network automatically. The
DHCP server can be turned OFF if necessary; however, in order to do so
you must manually set a static IP address for each computer on your
network. To turn off the DHCP server, de-select “Use Router As DHCP
Server” and click “Apply”.
Static Route
A static IP address connection type is less common than other connection types.
If your ISP uses static IP addressing, you will need your IP address, subnet
mask, and ISP gateway address. This information is available from your ISP or
on the paperwork that your ISP left with you. Type in your information, and click
“Apply”.
1. IP Address: Provided by your ISP. Enter your IP address here.
2. Subnet Mask: Provided by your ISP. Enter your subnet mask here.
3. ISP Gateway Address: Provided by your ISP. Enter the ISP gateway
address here.