Axesstel MV400 - Manual (Page 48)

47
To turn OFF the ping response, select “Not Respond to Ping on Internet Port”
and click “Apply”. The Modem will not respond to an ICMP ping.
HTTP Ping Blocking
To turn OFF the HTTP response, select “Not Respond to HTTP on Internet
Port” and click “Apply”. The Modem will not respond to an HTTP ping.
LAN IP Setup
Clicking on the header of the “LAN IP Setup” tab will take you to its header page.
LAN TCP/IP Setup
All settings for the internal LAN setup of the Router can be viewed and
changed here.
1. IP Address: The “IP address” is the internal IP address of the Modem. The
default IP address is “192.168.2.1”. To access the Web Manager User
Interface, type this IP address into the address bar of your browser. This
address can be changed if needed. To change the IP address, type in the
new IP address and click “Apply”. The IP address you choose should be a
non-routable IP.
Examples of a non-routable IP are:
192.168.x.x (where x is anything between 0 and 255), and
10.x.x.x (where x is anything between 0 and 255).
2. Subnet Mask: There is no need to change the subnet mask. This is a