Axesstel MV400 - Manual (Page 38)

37
Web Manager User Interface
The Web Manager User Interface is a web-based tool that you can use to set up
the Modem if you don’t want to use the default setting of Install CD. You can also
use it to manage advanced functions of the Modem. From the User Interface, you
can perform the following tasks:
• View the Modem’s current settings and status
• Configure the Modem's router function to connect to your Service
Provider with the settings that they provided you
• Change the current network settings such as the Internal IP address, the
IP address pool, DHCP settings, and more
• Set the Modem’s firewall to work with specific applications (port
forwarding)
• Set up security features such as client restrictions, MAC address filtering,
WEP, and WPA
• Enable the DMZ feature for a single computer on your network
• Change the Modem’s internal password
• Reboot the Modem
• Back up your configuration settings
• Reset the Modem’s default settings
• Update the Modem’s firmware
Before you use the Advanced User Interface, you will need to have a User Name
and Password of the Modem. Please contact your Service Provider to obtain
them.
Step 1
│
Access Network Setup
1.1. Connect the PC to your Modem using the CAT-5 Ethernet cable. Use ANY
one of the Ethernet ports on your Modem.
1.2 If you have installed AxessManager, start AxessManager utility if it is not
already active. From Main window, select Menu button. Refer to
AxessManager Operational Guide for instructions if needed. If you have not
installed AxessManager, refer to section “Configuring Ethernet Access” to