Axesstel MV400 - Manual (Page 31)

30
Antenna + 1 bar Low signal (-111 ≤ sig. < -103 dBm )
Antenna + 2 bars Medium-Low (-103 ≤ sig. < -98 dBm)
Antenna + 3 bars Medium signal (-98 ≤ sig. < -93 dBm)
Antenna + 4 bars Medium-high (93 ≤ sig. < -88 dBm)
Antenna + 5 bars Strongest signal (≥ -88 dBm)
2. Battery Icon
OFF No battery
Blinking red Battery error or very low
Blue empty battery Battery low level
Blue with 1 bar Battery level 25%
Blue with 2 bars Battery level 50%
Blue with 3 bars Battery level 75%
Blue with 4 bars Battery level close to 100%
Progressing 1- 4 bars Battery is charging
3. Network Connection Icon
This icon shows the wired network connection mode of your Modem. Only one
mode can be used at a time.
OFF No computers connected to Modem
Ethernet RJ-45 port or Wi-Fi is in use
USB USB port is in use
COM COM port is in use
Note that there is a USB/Ethernet switch in the front of the Modem to select
which preferred mode for your connected computers. The COM mode can only
be activated from the "Menu" window.
4. Air Interface Icon
This icon informs you that the Modem is tuned to a 1x or EV-DO wireless
network. By default your Modem is programmed to search and use EV-DO
network. If unavailable, the Modem will try to search for a 1x network.
OFF No network available, no service
EV-DO EV-DO network is available
1xRTT 1X network is available