CANOGA PERKINS 9171 Metro Ethernet Routing Switch - Manual (Page 10)

9171 Installation Guide
Proprietary & Confidential Canoga Perkins Metro Ethernet Routing Switch Page 10 of 26
c. Take out screw (complete package with front hangers), and install one end of the front hangers
on switch, as shown in Fig. 2-2.
Fig. 2-2: Installation Sketch Map of Front hangers
d. Place switch on the tray horizontally, push it slightly into the rack along the tray, and fix the other end
of front hangers upon the front hold strip of rack using screw and its matching floating nut.
Fig. 2-3: Installation Sketch Map of Front Hangers Coupling with Tray
Front Panel
Front Hangers
Front Hangers