CANOGA PERKINS 9171 Metro Ethernet Routing Switch - Manual (Page 21)

9171 Installation Guide
Proprietary & Confidential Canoga Perkins Metro Ethernet Routing Switch Page 21 of 26
Chapter 6 Upgrade of Operating System
9171 series of Ethernet switches can support new features and enhance system performance without
replacing hardware by upgrading the operating system.
Fig. 6-1: Upgrade Operating System
a. Copy the upgrading mirror to switch
In the privilege mode of switch, use the command COPY to copy the mirror files on TFTP server
to the boot directory of switch flash;
Swtich#copy tftp://10.10.29.160/CanogaOS-v1.2.5.fcs1-9171.r.bin
flash:/boot/CanogaOS-v1.2.5.fcs1-9171.r.bin
When copying, check if the switch has enough space; if the space is not enough, you can delete
redundant mirror.
b. Set the mirror that will be loaded when switch starts next time
After copying the mirror to a relevant directory of switch, you can use the command boot to set
the mirror that will be loaded when switch starts next time;
Switch(config)#boot system flash:/boot/CanogaOS-v1.2.5.fcs1-9171.r.bin
c. View the mirror that will be loaded when switch starts next time
After setting the mirror that will be loaded when switch starts next time, you can use the command
SHOW
to check if the setting is valid;
Switch#show boot images
System image files list:
Current boot image version: 9171-1.2(5), fcs1