2 installation, 7 installation tools, 1 installing device onto rack – CANOGA PERKINS 9171 Metro Ethernet Routing Switch User Manual
Page 9
9171 Installation Guide
Proprietary & Confidential
Canoga Perkins Metro Ethernet Routing Switch
Page 9 of 26
2.1.7 Installation Tools
Prepare the following tools before installation:
Flathead screwdrivers
Phillips screwdrivers
ESD-preventive wrist strap
Note: The installation tools are not provided with 9171 Series Routing Switch
2.2 Installation
2.2.1 Installing Device onto Rack
9171 series of switches can be installed in a 19” standard rack in the following way:
Installation of Front Hangers Coupling with Tray
Note: Front hangers are only used to fix switches, but unable to bear the weight.
Fig. 2-1: Appearance Sketch Map of Front Hangers
Description:
(1) Screw hole for fixing front hangers and rack (choose M6 screw)
(2) Screw hole for fixing front hangers and switch
Installation Method:
Installation process of using front hangers coupling with tray:
a.
Wear ESD-preventive wrist strap, and check the grounding and stability of rack.
b.
Fix the tray to a proper position of rack horizontally.