CANOGA PERKINS 9171 Metro Ethernet Routing Switch - Manual (Page 19)

9171 Installation Guide
Proprietary & Confidential Canoga Perkins Metro Ethernet Routing Switch Page 19 of 26
Fig. 4-3 Connection Port Setting
Fig. 4-4 Port Communication Parameter Setting
4.3 Switch Power-on
After the switch is powered on and starts up, self-check information on equipment will display on the terminal.
Users are prompted to type Enter after self-check, then command line DOS prompts (such as
(CanogaPerkins)) will appear.
Type a command, configure Ethernet switches or view the running state of Ethernet switches. Enter "?"
whenever you need a help. See the subsequent chapters of this manual for specific configuration commands.